This is an old revision of the document!
P0141/P0147/P0161/P0167 O2 Sensor Heater Circuit Malfunction
- Make sure the iO2SS is properly powered. Measure the unit's power input (red wire) when the engine is on; you should measure >12V.
- Ensure the iO2SS's signal outputs (green wires) are connected to the appropriate oxygen sensor signal wires leading to the PCM.
- Verify all other wiring and check all solder joints or crimp connectors for loose connections, frayed wires, or corrosion.
- Contact support@symtechlabs.com for further support.
